・Same BATFLY geometry with directional “non round profile”. The carrier is made of ALUMINUM AL7075-T6. This allows to optimized shape, reduced weight, higher rigidity, with introduction of a new style.
・Improved rotor to hub load transfer: The classic hub-rotor coupling system, the pins, are substituted with new connecting components, clips and nails, avoiding deformation and floating variability during product life.
・The new rotor-hub coupling geometry, that allows the rotor stems to slide in radial direction, improves the response to stresses and deformations at high temperature. More homogeneous disk temperature without increasing the weight.
・ The feeling of the rider is improved and more direct. The new rotor-hub coupling system is more direct and the two components are in constant and direct contact. This means that the rider feels a powerful and effective brake from the beginning to the end of the braking event.
・Main MXGP riders declare an improved feeling and power of the brake system using the new EPTA discs.
・New design and shape of the Hubs dedicated to all different application already available in our catalog for Batfly application.

**Requires 270mm Front Caliper Bracket**

BATFLY rear fixed rotor that improves brake response & modulability.
The patented Batfly design improves the rider's feeling & response during the overall braking event, bringing the performance to th top of the category.
Thanks to the special grooves on the outer braking surface, heat is dissipated & the brake pads are effectively cleaned at each pass over the grooves while braking.

Oversized 240mm rear rotor kit that includes disc & the caliper relocation bracket.

BATFLY EPTA 270mm disc, caliper relocation bracket & a set of CM46 Racing Sintered pads all in one kit.
Simple bolt on upgrade for your front brakes.
Disc included is the Batfly EPTA Aluminum series disc with the carrier made of 7075 T6 aluminum & improved rotor to hub load transfer.
The classic hub-rotor coupling system, the pins, are substituted with new connecting components, clips and nails, avoiding deformation and floating variability during product life.
Same rotor used by top factory teams & racers around the world.